Bulk Material Delivery in Tiltonsville, OH

Ohio Rock Supply handles gravel and aggregate delivery in Tiltonsville, OH. The base stone most projects here start with is 304 limestone, also called #304 stone, the standard Ohio base under drives, parking pads and asphalt. Tiltonsville sits in Jefferson County, where hillside ground sheds water fast and moves it toward the river bottoms.

That runoff is why coarse stone matters as much as base stone on slopes, swales and banks around town.

Materials for Tiltonsville Projects

Steep ground above the valley sends water down hard, so the first job is holding soil in place. Coarse, open-graded stone does that work. The list below runs from the biggest rock down to the finest material, so you can match the size to the job.

• RipRap: stream and ditch bank armoring, culvert outlets and pond edges taking storm runoff.
• Large River Rock: dry creek beds, heavier decorative work and erosion control on banks.
• #4 Crushed Stone: heavy drainage, construction entrances and filter stone under rip rap.
• #57 Limestone: drainage, French drains and drive surfacing, the clean stone Ohio yards stock most.
• 304 Aggregate Base: the compacted base course under drives, pads and asphalt.

On a slope, place the coarse stone first so water passes through rather than pushing soil downhill. Then bring in the finer material for the surface you walk or park on.

Delivery to Tiltonsville and the Surrounding Area

You order online and pick a quantity by the ton or the yard. If you are unsure how much a pad, drive or bed needs, the calculator sizes the load for you before checkout.

Choose your delivery date at checkout, and a dump truck brings the material to your site. Ohio Rock Supply covers Tiltonsville and the rest of Jefferson County, including Steubenville, Toronto, Mingo Junction, Brilliant and Dillonvale.

Ground and Conditions in Tiltonsville

This is hill country, mostly unglaciated, with thin to moderately deep soils weathered from sandstone, shale and coal-bearing rock. The hillsides carry clayey slope debris, and the flat river bottoms hold sand, gravel and silt.

Steep slopes shed heavy rain fast into narrow valleys. That runoff scours ditches and culverts, low bottoms flood, and water seeping from hillsides softens cuts and fills. Clayey debris and soft red shale can slump after long wet spells.

Cutting, filling and driveway work on slopes go best in drier weather, and the working season runs from spring into late fall. Winters bring repeated freeze-thaw that pries weathered rock apart and heaves wet clay on cut slopes and drives built into hillsides. For footings and posts, frost depth is set by each local building department, so confirm the local figure before you dig.

Questions About Stone in Tiltonsville

What stone should I use for drainage in Tiltonsville?

Start with clean, open-graded stone so water moves instead of pooling. #57 limestone fits French drains and downspout runs, and #4 crushed stone handles heavier flow, trench bottoms and construction entrances. For bank and ditch protection, set rip rap or large river rock over a filter layer of #4 stone. Match the size to the volume of water you expect, then bed the finer material on top.

What should I have ready when the truck arrives?

Have the drop spot clear and firm, with enough room for the truck to dump and pull out. Mark any pipes, stakes or plants you want left alone. Know where you want the pile set, since the driver places it where the truck can reach. If the site is on a slope, pick a level spot near the work so you move the material as little as possible.

Order Bulk Stone for Your Tiltonsville Project

Ohio Rock Supply delivers 304 limestone, drainage stone, sand and topsoil to Tiltonsville and Jefferson County. Pick your material, size the load with the calculator, and choose a delivery date at checkout. Place your order online when you are ready.