Fill and Base Material Delivered in Canton, OH

What do you order when a low, wet lot has to hold a driveway or a building pad? For gravel and aggregate delivery in Canton, OH, that question usually starts with fill dirt to raise the grade, then 304 limestone for the base course. Ohio Rock Supply delivers bulk material across Stark County, and the ground here decides how much of each you need.

Canton sits on glaciated ground with silty clay loam till and a dense layer under it that drains slowly. Sand and gravel knolls in the valleys drain freely. Where you build changes what goes under the slab or the drive.

Delivery to Canton and the Surrounding Area

You order online, pick the material, and set the quantity by the ton or the yard. The quantity calculator sizes the load for you, so you are not guessing at the pile. Choose your delivery date at checkout and a dump truck brings the load to your site.

Bulk delivery covers Canton and the rest of Stark County, including Massillon, Alliance, North Canton, Louisville and Uniontown. Tell the driver where the pile goes so the truck can reach it. A pad, a drive or a garden bed all get material dropped where the work starts.

If you are building up a low spot before anything else goes down, order the fill first and let the base stone follow once the grade is set.

Materials for Canton Projects

The bulk-fill angle matters here: most Canton jobs start by raising grade and building a pad, and the surface material comes after. Fill dirt does the raising, 304 limestone does the structural work, and the finish layer depends on what you are paving or planting.

• Fill Dirt: grading, leveling, backfill and raising low spots before a base goes down.
• 304 Aggregate Base, the local 304 limestone: driveway, parking pad and shed base, and the base course under asphalt.
• 411 Stone: topping for gravel drives and parking areas, and bedding under pavers. Stone up to about 1 inch mixed with fines packs tight over a 304 base.
• #57 Limestone: drainage, French drains, drive surfacing and concrete aggregate.
• Top Soil: lawn and bed prep once the grade is finished.

For a drive, start with 304 limestone over compacted fill and top it with 411 limestone. For a drain, clean stone like #57 limestone lets water move instead of ponding. For a patio, screenings bed the pavers over a compacted base.

Ground and Conditions in Canton

Start with the soil, because it decides whether a base holds or pumps. The dense subsoil layer under much of this ground drains slowly, and water perches on it. An under-built base on that ground moves under a truck or a car.

Freeze-thaw matters too. Cold, snowy winters heave wet till under drives and walks, and anything set above the frost line lifts. Frost depth runs 38 inches in Summit County and 36 inches or more in Cleveland, set by each local building department.

Wet spring ground holds back base work until the soil drains, and the season then runs into late fall. Sand and gravel knolls and valley outwash drain freely, so a site on one of those needs less fill and less drainage stone. On steep valley sides, watch bank scour and slips after heavy rain.

Order 304 Limestone and Fill for Your Canton Site

Most Canton jobs start the same way: raise the grade with fill dirt, then build on 304 limestone. That is the local base stone, and it is what carries a drive, a pad or a parking area through freeze-thaw and slow-draining clay. Size your load with the calculator and place your order online for delivery in Stark County.