Fill Dirt Delivery for North Canton, OH

Ohio Rock Supply handles gravel and aggregate delivery in North Canton, OH, and most orders start the same way: size the load with the calculator before you pick a material. For most sites here that means 304 limestone, the standard Ohio base stone under drives and pads. Get the quantity right and the rest of the job goes faster.

Delivery to North Canton and the Surrounding Area

Order online, choose your quantity by the ton or the yard, and pick a delivery date at checkout. The calculator takes your measurements and turns them into a load size, so you are not guessing at the pile.

A dump truck delivers to your site in North Canton, which sits in Stark County. We also run loads to Canton, Massillon, Alliance, Louisville, and Uniontown. Have a clear spot for the pile and know where you want it dropped.

Wet spring ground is common here, so plan the drop for ground that will hold a truck. If the site is soft, the fill and base work is often better scheduled after it drains. The season runs into late fall.

Materials for North Canton Projects

This market builds from the ground up, so fill and sub-base carry most of the work. Raise the grade with Fill Dirt first, then set your base on top of a level pad instead of a low spot. That single step saves you base stone later.

For that base, 304 Aggregate Base is the local standard. It packs hard under asphalt, a drive, or a shed pad. Top it with 411 Stone, or 411 limestone, which packs tight over the 304 and leaves a smoother surface.

Where a drive or pad has to shed water, clean stone does the job. #57 Limestone is the size Ohio suppliers stock most widely for drainage, French drains, and drive surfacing. #4 Crushed Stone handles heavy drainage, construction entrances, and trench bottoms.

For bedding and finishing work, Screenings, also called limestone screenings or stone dust, set pavers and firm up paths. Top Soil goes on last where you are seeding or planting.

Ground and Conditions in North Canton

North Canton sits on the glaciated plateau of northeast Ohio. That means silty clay loam till with a dense, slow-draining layer under it, plus sand and gravel knolls and outwash in the valleys. Shale or sandstone sits close to the surface on some hills.

That dense subsoil changes how you build. Water perches on it, so a base laid over soft, wet ground will not hold. Excavate to firm ground, then bring the grade back up with fill and compact it in lifts before any 304 limestone goes down.

Cold winters bring repeated freeze-thaw, which heaves wet till under drives and walks. Frost depth runs 38 inches in Summit County and 36 inches or more in Cleveland, set by each local building department. Follow your building official on footing depth.

Drainage matters on the steep valley sides, where stream and ravine banks scour and slip after heavy rain. Armor those spots with RipRap and let clean stone carry water away.

Questions from North Canton Buyers

What is the best base under pavers in North Canton?

Use 304 limestone as the structural base, compacted in lifts over firm ground. Set the pavers on a bedding layer of screenings, also called stone dust, which levels and locks them in. On the dense till here, dig out any soft, wet material first so the base sits on something that will not move.

Do you supply contractors working in North Canton?

Yes. Contractors order online the same way homeowners do: pick the material, size the load by the ton or yard with the calculator, and choose a delivery date. We deliver 304 limestone, clean stone, sand, and fill to job sites across North Canton and Stark County. Multiple loads can be scheduled as the job moves.

Order 304 Limestone and Fill for Your North Canton Job

Most North Canton projects start with two materials: fill to raise the grade and 304 limestone to build the base. Size both with the calculator, pick your delivery date, and we will bring the load to your site. Order online when you are ready.