Skip to main content
FREE Delivery!|(216) 247-5333

Belmont County, Ohio ยท Free Delivery

Fill and Base Material Delivered in Martins Ferry, OH

Free delivery to Martins Ferry on every order, with loads arriving in as fast as 2 business days.

Delivering to Martins Ferry, OH

Free delivery on every order.

  • Free delivery to Martins Ferry
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Martins Ferry

Crushed gravel and base materials that compact under tires.

Rock & Stone delivered to Martins Ferry

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Martins Ferry

Decorative delivered to Martins Ferry

Rounded stone for beds, borders and water features.

Sand delivered to Martins Ferry

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Martins Ferry

Soil and fill by the ton, mulch by the cubic yard.

Fill Dirt

Compactable dirt for grading, backfill and low spots

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Martins Ferry

How delivery to Martins Ferry works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Martins Ferry.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Martins Ferry addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

What do you order when a Martins Ferry lot sits low and the yard keeps holding water? You raise the grade first, then build on it. Ohio Rock Supply handles gravel and aggregate delivery in Martins Ferry, OH, and the material most orders start with is 304 limestone.

The hillsides here shed rain fast, so a pad that looks level in July can sit wet all spring. Fill and base go down in lifts, and the work goes best in drier weather.

Delivery to Martins Ferry and the Surrounding Area

Ordering runs online from start to finish. You pick the material, choose a quantity by the ton or by the yard, and set a delivery date at checkout.

If you are unsure how much you need, the calculator sizes the load for you. Enter your area and depth and it returns the figure, so you are not guessing at a pile size.

A dump truck then delivers to your site in Martins Ferry. The truck needs a clear path and a spot where it can dump and pull out, so keep the approach open on delivery day.

Martins Ferry sits in Belmont County, and deliveries reach the rest of the county as well, including St. Clairsville, Bellaire, Barnesville, Shadyside and Powhatan Point.

Materials for Martins Ferry Projects

Most jobs in this market start with grade. Fill dirt raises a low spot, backfills a foundation, or levels a yard before anything else goes down. On a sloped lot, that fill is what creates a flat building pad for a shed, garage, or driveway apron. Order Fill Dirt when you need volume under the finished surface.

Once the pad is where you want it, 304 limestone goes on top. This is the standard Ohio base stone, and it is what carries a driveway, parking pad, or the base course under asphalt. It packs tight because the stone and the fines are blended together. Order 304 Aggregate Base for that layer.

For the surface of a gravel drive, 411 limestone is the usual topping. It runs up to about an inch with fines, so it locks together over a compacted 304 base and stays put under tires. Order 411 Stone for drive and parking surfaces, or Driveway Gravel if you are refreshing an existing drive.

Drainage is its own material. Where water needs to move instead of sit, clean stone by number is what Ohio suppliers stock: #57 Limestone for French drains and drive surfacing, and #4 Crushed Stone for heavy drainage, trench bottoms, and construction entrances.

For a patio or walkway, the bedding layer matters as much as the base. Screenings give you fine crushed limestone that levels under pavers and packs firm. Top Soil finishes the lawn and beds once the hard work is done.

Ground and Conditions in Martins Ferry

This part of Ohio is unglaciated hill country. Soils here are thin to moderately deep and weathered from sandstone, shale, and coal-bearing rock, with clayey slope debris on the hillsides. In the flat river bottoms you find sand, gravel, and silt instead.

That mix matters to what you build on. Clayey ground drains slowly and softens when it stays wet, so a base that is too thin will pump and rut under a loaded truck. Building up with fill and then a compacted 304 limestone layer spreads the load instead of letting it sink into the subsoil.

Water is the other half of the problem. Steep slopes push heavy rain into narrow valleys fast, so runoff scours ditches and culverts and low bottoms flood. Water seeping out of hillsides softens cuts and fills. A clean stone drainage layer, or armoring a ditch bank with RipRap, is how you keep that water from taking the ground out from under a drive.

Timing counts too. Long wet spells saturate hillsides and set off slips, so cutting, filling, and driveway work on slopes goes best in drier weather. The working season runs from spring into late fall.

Winters bring repeated freeze-thaw, which pries weathered rock apart and heaves wet clayey soil on cut slopes and on drives built into hillsides. Frost depth is set by each local building department, so confirm the local figure before digging footings or posts.

Order Fill and Base Stone for Your Martins Ferry Project

Most work here starts with 304 limestone over properly placed fill, because grade and drainage decide how the finished surface holds up. Ohio Rock Supply delivers that base stone, along with 411 limestone, clean stone by number, sand, and topsoil, across Martins Ferry and Belmont County. Pick your material, size the load with the calculator, and place your order online.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Martins Ferry, OH

What is the best base under pavers in Martins Ferry?

Start with 304 limestone. That layer carries the load and keeps the surface from shifting. On top of it, set the pavers in screenings, which are fine crushed limestone that levels easily and locks the units in place. If the subsoil is clayey and stays wet, add a clean stone drainage layer before the base goes down.

Do you supply contractors working in Martins Ferry?

Yes. Contractors order the same way homeowners do: online, by the ton or yard, with a delivery date chosen at checkout. That works for repeat orders on driveways, pads, and drainage work around Belmont County. The calculator sizes each load, so you can match the quantity to the phase of the job and keep the site moving without storing extra material.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.