Fill and Base Material Delivered in Martin, OH

What does it take to raise a low lot or build a pad that stays put? In Martin, it starts with fill and a compacted base. Ohio Rock Supply brings gravel and aggregate delivery in Martin, OH, so you can order online and have it dumped where you need it.

The workhorse here is 304 limestone. On this flat former lake bed, heavy clay holds water, so a real base under your slab or drive matters.

Delivery to Martin and the Surrounding Area

Ordering is done online. You pick the material, then choose a quantity by the ton or the yard. If you are not sure how much a pad or drive needs, the calculator sizes the load for you.

At checkout you pick a delivery date, and a dump truck brings the load to your site. Bulk delivery works best when the truck can reach the drop point and the ground is firm enough to hold it.

Martin sits in Ottawa County, and we deliver across the county, including Port Clinton, Oak Harbor, Genoa, Elmore and Graytown.

Materials for Martin Projects

Most jobs in Martin start with grade. If your lot sits low or your pad needs height, the first load is usually fill, then a compacted base goes over it.

Start with Fill Dirt to raise low spots and backfill before anything else goes down. Once the grade is where you want it, 304 Aggregate Base is the standard Ohio base course, and it packs tight under asphalt, pads and drives.

For a driveway surface, 411 Stone is the topping. It is stone up to about 1 inch mixed with fines, so it locks together over a 304 base. A finer walkable surface comes from Walkway Gravel.

Water is the other half of the job. #57 Limestone is the clean stone most often used in French drains and drainage beds around a pad. Fine drainage and pipe bedding call for #8 Crushed Stone.

Ground and Conditions in Martin

The ground here is a flat former lake bed of heavy, sticky clay and silt, broken in places by low sandy beach ridges. Under-built bases fail on that clay, because water sits instead of draining away.

Spring rain and snowmelt sit on the clay until ditches and field tile carry them off, while the sandier ridges drain faster. That is why a drainage layer and a properly compacted base matter more than thickness alone.

Cold winters bring repeated freeze-thaw, and wet clay holds water close to the surface, so poorly drained drives and pads heave. Frost depth is set by each local building department, so confirm the local figure before you set footings.

Bank slumping and scour along creeks and ditches follow heavy rain. On lots that front Lake Erie or its bays, wave erosion is worst in early spring storms, which is where rip rap earns its place.

Clay flats stay saturated well into spring, so base and driveway work waits until the ground has drained and firmed. The season then runs into late fall.

Questions from Martin Buyers

What is the best base under pavers in Martin?

Use 304 limestone as the base course, compacted in lifts, because it locks together and carries load over soft clay. Bed the pavers in screenings, which is fine crushed limestone from about 1/4 inch down to dust, and it levels and locks the units. Where water collects, add a clean stone drainage layer such as #57 limestone so the base does not sit wet.

Do you supply contractors working in Martin?

Yes. Contractors order the same way as homeowners: online, choosing quantity by the ton or yard and a delivery date at checkout. A dump truck delivers to the site in Martin or elsewhere in Ottawa County. The calculator sizes each load, which helps when a job needs fill, base and drainage stone staged in the right order.

Order Fill and Base Material in Martin

For grade work and pads in Martin, 304 limestone is the base to build on, with fill dirt underneath and 411 limestone on top where a drive needs a surface. Order online, size the load with the calculator, and pick your delivery date. Place your order and we will deliver it to your site.