Skip to main content
FREE Delivery!|(216) 247-5333

Holmes County, Ohio ยท Free Delivery

Bulk Aggregates for Erosion Control in Killbuck, OH

Free delivery to Killbuck on every order, with loads arriving in as fast as 2 business days.

Delivering to Killbuck, OH

Free delivery on every order.

  • Free delivery to Killbuck
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Killbuck

Crushed gravel and base materials that compact under tires.

Rock & Stone delivered to Killbuck

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Killbuck

Decorative delivered to Killbuck

Rounded stone for beds, borders and water features.

Sand delivered to Killbuck

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Killbuck

Soil and fill by the ton, mulch by the cubic yard.

How delivery to Killbuck works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Killbuck.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Killbuck addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Steep hillsides shed rain fast here, and that runoff scours ditches, culverts and streambanks. Ohio Rock Supply stocks the coarse stone that answers it. Order gravel and aggregate delivery in Killbuck, OH and start with 304 limestone for the base, then build up in size where water runs hardest.

Hillside clay softens after long wet spells. Stone that locks together holds where bare soil will not.

Materials for Killbuck Projects

Erosion work starts coarse. Big, open-graded stone slows water and holds banks. Finer stone finishes surfaces and beds pipes. Work down the sizes and match each one to the job.

Coarse stone for banks and swales

RipRap armors stream banks, ditch banks, culvert outlets and pond edges. It takes the hit from storm runoff and wave action so soil stays put.

#4 Crushed Stone handles heavy drainage, construction entrances and trench bottoms. It also works as filter stone under rip rap, where a layer of smaller stone keeps the bank from washing out from underneath.

Railroad Ballast is the heaviest option. Use it for hard standing, track beds and severe drainage where water moves fast.

Clean stone for drainage

#57 Limestone is the clean stone Ohio suppliers stock most widely. It drains, backfills French drains and surfaces gravel drives. #67 Stone does the same work where a slightly smaller clean stone fits better.

Drain Rock suits French drains, downspout runs, foundation drains and drainage behind walls. #8 Crushed Stone goes finer still, for pipe bedding and paver joints.

Base and finish stone

304 limestone is the standard Ohio base stone. It goes under driveways, parking pads, shed bases and asphalt. 411 limestone tops gravel drives and beds pavers over a compacted 304 base.

Delivery to Killbuck and the Surrounding Area

Killbuck sits in Holmes County, and Ohio Rock Supply delivers across the area, including Millersburg, Glenmont, Holmesville, Baltic and Big Prairie. You order online and pick your quantity by the ton or the yard.

Not sure how much you need? Size the load with the calculator, then choose a delivery date at checkout. A dump truck brings the material to your site and drops it where you want it.

Have the drop spot clear before the truck arrives. Stone goes where it lands, so pick a firm, level spot on high ground away from the ditch.

Ground and Conditions in Killbuck

This is Southeast and southern Ohio hill country: mostly unglaciated hills with thin to moderately deep soils weathered from sandstone, shale and coal-bearing rock. Clayey slope debris sits on the hillsides, and sand, gravel and silt fill the flat river bottoms.

Steep slopes shed heavy rain fast into narrow valleys. Runoff scours ditches and culverts, low bottoms flood, and water seeping from hillsides softens cuts and fills. That is why bank and swale work calls for coarse, open stone rather than fines.

Landslides and slumps follow heavy or prolonged rain on steep hillsides of clayey slope debris and soft red shale. Stream bank scour comes with them in the narrow valleys.

Timing matters. Long wet spells saturate hillsides and set off slips, so cutting, filling and driveway work on slopes goes best in drier weather. The working season runs from spring into late fall.

Winters bring repeated freeze-thaw, which pries weathered rock apart and heaves wet clayey soil on cut slopes and on drives built into hillsides. Frost depth is set by each local building department, so confirm the local figure before digging footings or posts.

Questions About Stone in Killbuck

What stone should I use for drainage in Killbuck?

Start with #57 limestone for French drains, downspout runs and general drainage, and drop to #8 for pipe bedding and tight spots. Where a bank or swale takes fast runoff, go coarser with #4 crushed stone or rip rap. Under any of it, 304 limestone gives you a base that compacts and holds.

What should I have ready when the truck arrives?

Pick your drop spot and clear it. The truck needs a firm, level place to dump, on high ground and away from ditches, culverts and soft ground. Mark anything you do not want covered, and keep vehicles and pets clear while the bed lifts. If the ground is saturated, choose a drier day.

Order Bulk Stone for Killbuck

Ohio Rock Supply delivers bulk gravel, stone, sand and topsoil across Killbuck and Holmes County. Pick your material, set the quantity with the calculator, and choose a delivery date at checkout. Order online and get the stone on your site.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Killbuck, OH

What stone should I use for drainage in Killbuck?

Start with #57 limestone for French drains, downspout runs and general drainage, and drop to #8 for pipe bedding and tight spots. Where a bank or swale takes fast runoff, go coarser with #4 crushed stone or rip rap. Under any of it, 304 limestone gives you a base that compacts and holds.

What should I have ready when the truck arrives?

Pick your drop spot and clear it. The truck needs a firm, level place to dump, on high ground and away from ditches, culverts and soft ground. Mark anything you do not want covered, and keep vehicles and pets clear while the bed lifts. If the ground is saturated, choose a drier day.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.