Skip to main content
FREE Delivery!|(216) 247-5333

Scioto County, Ohio ยท Free Delivery

Bulk Gravel Delivery to Franklin Furnace, OH

Free delivery to Franklin Furnace on every order, with loads arriving in as fast as 2 business days.

Delivering to Franklin Furnace, OH

Free delivery on every order.

  • Free delivery to Franklin Furnace
  • Order from 1 ton
  • As fast as 2 business days

Gravel delivered to Franklin Furnace

Crushed gravel and base materials that compact under tires.

Rock & Stone delivered to Franklin Furnace

Graded crushed stone for drainage, concrete and heavy work.

RipRap

4" to 12"+ rock for shorelines, slopes and culvert outlets

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Franklin Furnace

Decorative delivered to Franklin Furnace

Rounded stone for beds, borders and water features.

Sand delivered to Franklin Furnace

Washed sand for masonry, concrete and leveling.

Soil, Fill & Mulch delivered to Franklin Furnace

Soil and fill by the ton, mulch by the cubic yard.

Fill Dirt

Compactable dirt for grading, backfill and low spots

From 1 Ton Delivered, FREE to your Doorstep

Cost per ton lowers the more you order!

Free delivery to Franklin Furnace

How delivery to Franklin Furnace works

  1. 1

    Pick the material and quantity.Open a product to see your price, with free delivery to Franklin Furnace.

  2. 2

    Choose a delivery date at checkout.As fast as 2 business days for most Franklin Furnace addresses.

  3. 3

    Clear a drop spot.The truck tips the load where you mark it. Note low wires or branches when you order.

Not sure how much you need?

Enter length, width and depth and the calculator returns the cubic yards and tons for your project.

Open the calculator

Order gravel and aggregate delivery in Franklin Furnace, OH online. Pick your material, pick your quantity by the ton or the yard, and set a delivery date at checkout. Ohio Rock Supply stocks 304 limestone.

Franklin Furnace sits in Scioto County, where hillsides shed heavy rain fast into narrow valleys. That shapes what you put under a patio or a drive.

Ground and Conditions in Franklin Furnace

Start with the failure a thin base shows here. Clayey slope debris and soft shale sit under a lot of ground in this part of Scioto County, and wet weather softens them. A paver patio bedded on sand alone heaves and dips after a few freeze-thaw cycles.

The fix is a compacted base that spreads load and drains. Build the base thick enough to bridge soft spots, then lock the surface with the right bedding layer. On slopes, cut and fill work goes best in drier weather, because long wet spells saturate hillsides and set off slips.

Freeze-thaw pries weathered rock apart and heaves wet clay on cut slopes and on drives built into hillsides. Frost depth is set by each local building department, so confirm the local figure before digging footings or posts.

Materials for Franklin Furnace Projects

Bedding decides how a patio or flatwork performs. Get that layer right and the pavers stay flat for years.

Start with 304 Aggregate Base, the standard Ohio base stone. Use it for the compacted base course under pavers, patios, driveways and shed pads. It packs hard and carries load.

Top the base with Screenings, also called limestone screenings or stone dust. The fine crushed limestone runs from about 1/4 inch down to dust, which makes it the bedding layer under pavers and patio slabs. It levels easily and locks the pavers in place.

For the joints between pavers, Mason Sand sweeps in and firms up. It also works for brick and block work.

Where the patio meets a downspout or a drain line, #8 Crushed Stone handles fine drainage and pipe bedding. Ohio suppliers sell this size by number, the way they sell #57 limestone and #4.

Finish the surround with Top Soil for lawn and bed prep, or Shredded Mulch to hold moisture in beds and tree rings through summer heat.

Delivery to Franklin Furnace and the Surrounding Area

Choose tons or yards when you order. Bulk material is sold by weight or by volume, and the calculator converts between them so you can size the load before checkout.

Measure your area, enter the depth you want, and let the calculator tell you the quantity. That keeps you from shorting a base course or paying for material you will not spread.

Ohio Rock Supply delivers bulk material across Scioto County, including Portsmouth, Wheelersburg, West Portsmouth, Lucasville and South Webster. A dump truck arrives on your delivery date and places the load at your site. Order online and set the date at checkout.

Questions About Gravel and Stone in Franklin Furnace

What gravel is best for a driveway in Franklin Furnace?

Build the drive on 304 limestone. It is the standard Ohio base stone, and it compacts hard over clayey ground. Top it with 411 limestone for a tight, packable surface, or use #57 limestone where you want clean stone that drains. On hillside drives, a compacted base matters more than the top layer.

How much material will my project need?

Use the calculator on the order page. Enter the length and width of your area and the depth you want, and it returns the quantity in tons or yards. For a paver base, measure the full footprint plus any apron or edge you plan to cover, then add the bedding layer separately. The calculator handles the conversion for you.

Order 304 Limestone and Bedding Material for Your Franklin Furnace Project

Size your load with the calculator, then pick your material and quantity. Ohio Rock Supply delivers 304 limestone, screenings, sand and soil to sites across Scioto County. Order online and choose your delivery date at checkout.

Frequently Asked Questions

Common questions about gravel and aggregate delivery in Franklin Furnace, OH

What gravel is best for a driveway in Franklin Furnace?

Build the drive on 304 limestone. It is the standard Ohio base stone, and it compacts hard over clayey ground. Top it with 411 limestone for a tight, packable surface, or use #57 limestone where you want clean stone that drains. On hillside drives, a compacted base matters more than the top layer.

How much material will my project need?

Use the calculator on the order page. Enter the length and width of your area and the depth you want, and it returns the quantity in tons or yards. For a paver base, measure the full footprint plus any apron or edge you plan to cover, then add the bedding layer separately. The calculator handles the conversion for you.

How is the material measured?

You can order by the ton or by the cubic yard, whichever suits how you plan the job. If you tell us the area you are covering and the depth you want, we will work the quantity out with you rather than leaving you to guess.