Order Gravel, Stone and Soil in Beallsville, OH

For gravel and aggregate delivery in Beallsville, OH, start with the amount, then pick the stone. Ohio Rock Supply sells bulk material online, and the calculator sizes your load by the ton or yard before you check out.

Most orders here start with 304 limestone. From there you build up, out, or into a bed.

Delivery to Beallsville and the Surrounding Area

You order online, choose a quantity by the ton or yard, and pick your delivery date at checkout. A dump truck then brings the load to your site in Beallsville or anywhere in Monroe County.

Use the calculator before you buy. Enter the area you are covering and the depth you want, and it converts that into the tonnage or yardage to order. No guessing, no short load in the middle of a job.

Coverage reaches the rest of the county too, including Woodsfield, Sardis, Clarington, Lewisville, and Jerusalem. Steep ground and narrow bottoms mean the truck needs a clear, firm spot to dump, so keep the drop zone open.

Materials for Beallsville Projects

Decorative rock is where a lot of Beallsville work lands, and it holds up on hillside yards. Beds, borders, dry creek beds, and ground cover all take different stone, so order by what the project does.

Beds and Borders

River Rock covers open beds and borders and stays put once it is down. For a dry creek bed, Large River Rock locks together and handles runoff. Natural Pea Gravel suits play areas, dog runs, and walkways.

Driveways and Pads

Build a drive on 304 Aggregate Base and top it with 411 Stone, also called #411 limestone. It packs tight over the base and sheds water off the crown. Driveway Gravel resurfaces a drive that is already firm.

Drains and Wet Spots

Clean stone moves water, and that matters on these slopes. Use #57 Limestone for French drains and #4 Crushed Stone where the flow is heavy. Drain Rock handles downspout runs and foundation drains.

Patios, Walkways, and Soil

Screenings bed pavers and level a patio. Walkway Gravel gives paths a finer surface. Mason Sand fills paver joints, and Top Soil preps lawns and beds.

Ground and Conditions in Beallsville

Start with the soil and what it does to an under-built base. This is unglaciated hill country, with thin to moderately deep soils weathered from sandstone, shale, and coal-bearing rock. Hillsides carry clayey slope debris, and the flat river bottoms hold sand, gravel, and silt.

That clayey ground moves when it gets wet. An under-built base on a slope will rut and settle, so the 304 limestone layer has to be deep enough and compacted before anything goes on top.

Water drives most of the trouble. Steep slopes shed heavy rain fast into narrow valleys, so runoff scours ditches and culverts and low bottoms flood. Seepage from hillsides softens cuts and fills, and clayey slope debris can slip after a long wet spell.

Winters bring repeated freeze-thaw that pries weathered rock apart and heaves wet clayey soil on cut slopes and on drives built into hillsides. Frost depth is set by each local building department, so confirm the local figure before digging footings or posts.

Timing matters as much as material. Long wet spells saturate hillsides and set off slips, so cutting, filling, and driveway work on slopes goes best in drier weather. The season runs from spring into late fall.

Order 304 Limestone and Landscape Rock in Beallsville

Most Beallsville jobs start with 304 limestone, the base stone that holds everything above it. From there, add landscape rock, drainage stone, sand, or topsoil to finish the work. Size your load with the calculator and place your order online for delivery in Beallsville, OH.