Order Gravel, Stone and Soil in Athens, OH

For gravel and aggregate delivery in Athens, OH, the ground under your project sets the plan. Most of this county is unglaciated hill country, with clayey slope debris on the hillsides and thin soil over sandstone and shale. That means 304 limestone base depth matters more here than it would on flat, deep ground. Ohio Rock Supply delivers 304 limestone, clean stone, sand and soil in bulk to sites around Athens County.

Delivery to Athens and the Surrounding Area

You order online and pick your quantity by the ton or by the yard. If you are not sure how much a pad, drive or bed needs, the calculator sizes the load for you before you check out.

Choose your delivery date at checkout and a dump truck brings the material to your site. Bulk loads go to Athens and to the rest of Athens County, including Nelsonville, The Plains, Glouster, Albany and Coolville.

Slope work is worth planning around. Long wet spells saturate these hillsides, so a truck needs firm, dry ground to dump on. Spring through late fall is the practical window for cutting, filling and drive work on slopes.

Materials for Athens Projects

Raising grade and building a pad is the work that comes first on most hill lots. Fill Dirt levels low spots and builds up a site before any stone goes down. Spread it, compact it, then cap it with 304 Aggregate Base.

For a driveway, 304 limestone goes down first as the structural layer, then 411 Stone tops it. The 411 limestone packs tight because it carries fines, so the surface stays firm under tires.

For a patio or paver walk, bedding matters as much as base. Screenings give you a fine, level bed over compacted stone, and Washed Sand works under slabs where you want a clean, drainable layer.

For drainage, clean stone is the right call because it lets water move. #57 Limestone is the size Ohio suppliers stock most widely, and Drain Rock handles French drains, downspout runs and drainage behind walls.

Ground and Conditions in Athens

Start with the soil, because it decides how deep your base has to be. Thin, clayey hillside ground moves under load, so a shallow stone layer over soft subsoil will rut and shift. A deeper 304 limestone base spreads the weight and keeps the surface where you put it.

Water is the other half of the problem. Steep slopes shed heavy rain fast into narrow valleys, so runoff scours ditches and culverts and low bottoms flood. On the hillsides, water seeping out softens cuts and fills, and clayey slope debris can slip after a long wet spell.

That points to clean stone for drainage and to rip rap for armoring. RipRap protects stream and ditch banks, culvert outlets and pond edges against storm runoff. Winters bring repeated freeze-thaw, which pries weathered rock apart and heaves wet clay on cut slopes and drives built into hillsides.

What is the best base under pavers in Athens?

Compacted 304 limestone gives you the structural base, then a leveling layer of screenings on top to bed the pavers. Screenings are fine crushed limestone from about 1/4 inch down to dust, so they pack flat and hold a paver without rocking. On clayey hillside ground, build the 304 layer deep enough to carry the load.

Do you supply contractors working in Athens?

Yes. Contractors order the same way anyone else does: online, by the ton or yard, with a delivery date picked at checkout and a dump truck dropping the load at the site. That works for drive and pad jobs, drainage runs and paver work around Athens and the rest of Athens County.

Order 304 Limestone and More for Your Athens Project

304 limestone is the material most Athens jobs start with, whether you are raising grade for a pad, rebuilding a drive or setting a base for pavers. Add clean stone, sand, soil or rip rap to the same order and have it all delivered to your site. Order online when you are ready.