What is the difference between crushed stone and Natural Pea Gravel?

Crushed stone is angular and packs tight, so it locks together under a drive or a base. Natural Pea Gravel is small rounded natural stone that stays loose and drains freely. Use crushed stone like #57 limestone for structure and drainage beds, and Natural Pea Gravel for play areas, dog runs, walkways and pipe backfill.

Should I order material by the ton or by the yard?

Both work. Order by the ton when you want weight, which suits stone and aggregate loads, and by the yard when you are thinking in volume for soil, sand or mulch. Size the load with the calculator first so the quantity matches the area you are covering, then choose the unit at checkout.

Which stone is best for drainage in Hardin County?

Clean stone is the answer on this clay till, because fines are what clog a drain. #57 limestone is the standard choice for French drains and drive surfacing. Go with #8 crushed stone for pipe bedding and tight spots, and #4 crushed stone for heavy drainage, trench bottoms and construction entrances over soft ground.

Hardin County, OH Aggregate and Rock Delivery

Ohio Rock Supply handles gravel, stone and aggregate delivery in Hardin County, OH. Start with the calculator to size the load by the ton or the yard, then pick your material. Most jobs here begin with 304 limestone, the base stone Ohio crews order under drives, pads and pavement.

Hardin County sits on clay loam and silty clay till, so ground drains slowly and holds water in the flat swales after spring rain. A load of 304 limestone gives you a base that compacts and sheds that water instead of pumping it back up.

Ground Conditions Across Hardin County

The ground here is glacial till, clay loam to silty clay, over gently rolling land. Low moraine ridges break up flat, wet swales, and the larger river valleys carry sand and gravel that drain fast. That mix decides what you order and when you can work it.

Clayey till drains slowly. After spring rain or snowmelt, water sits in the flats until ditches or tile clear it. Plan a clean stone drainage layer under and beside anything that holds water, and dig the grade so it runs somewhere.

Stream and ditch banks scour after heavy rain. Bare graded soil washes, and steep valley sides slump. Rip rap on those banks and a stone check at culvert outlets take the hit before the soil moves.

Base, driveway and paver work starts once the ground thaws and the flats dry out in spring, and it runs into late fall. Frozen or saturated clay will not compact. Time your delivery to a dry window and the same stone does more.

Cold winters bring repeated freeze-thaw. The local frost depth runs 32 inches in Columbus and Dayton, set by each local building department. Wet clay under drives and patios heaves, and shallow posts and pads lift with it, so the subgrade and drainage matter as much as the stone on top.

Materials Delivered in Hardin County

Sizes run coarsest to finest. Match the size to the job and the ground under it.

304 limestone, also called #304 limestone or #304 stone, is the one most jobs here start with. Order it for a new drive, a parking pad, a shed base, or the base course under asphalt. It packs tight because the fines bind with the stone.

411 limestone, or #411 limestone, is the topping. Stone up to about one inch mixed with fines packs tight over a 304 base, so it is the finish layer on a gravel drive and the bedding under pavers.

Choosing the Right Material

Hardin County ground is clay loam and silty clay till. Drainage layers and compactable base stone matter more than looks when water sits in the swales. Pick by the job, not by the prettiest pile.

Match the size to the task. A new drive or pad takes 304 limestone as base with 411 limestone or driveway gravel on top. A French drain or downspout run takes clean stone, so #57 limestone or drain rock lets water move without fines clogging it.

Decorative work is a different order. River rock and large river rock handle beds, borders and dry creek beds. Natural Pea Gravel fits play areas, dog runs and walkways. Mason sand goes in paver joints and block work, and washed sand beds and levels under slabs.

Next door, Allen County and Union County sit on the same western and central Ohio till plains. The ground is similar, clay till with low moraine ridges and wet swales, so base and drainage choices carry over. The difference is typical projects, not the soil.

Hancock County is different. It lies on the Lake Erie lake plain, a flat former lake bed of heavy, sticky clay and silt across the old Great Black Swamp country, broken by low sandy beach ridges. That ground holds water harder than Hardin County till. There, clean stone drainage under a drive matters even more, and 304 limestone base depth and compaction get closer attention.

Delivery Across Hardin County

Order online, size the load by the ton or the yard with the calculator, and pick a delivery date at checkout. A dump truck brings the material to your site and drops it where you need it. That covers Kenton, Ada, Forest, Dunkirk, Alger, Mount Victory, Ridgeway and Dola.

Bulk delivery works best when the truck can reach the drop spot. For a new drive or pad, have the grade cut and the access clear before the load arrives, so the stone goes down on prepared ground instead of wet clay.

Think about where the pile should sit. Stone dropped near the work saves moving it twice, and keeping clean drainage stone off bare soil keeps the fines out of it.

Order Gravel, Stone and Soil for Hardin County

Ohio Rock Supply delivers 304 limestone, clean stone, sand, soil and decorative rock across Hardin County, from Kenton and Ada to Forest, Dunkirk, Alger, Mount Victory, Ridgeway and Dola. Size your load with the calculator, choose your material, and pick a delivery date at checkout. Place your order online and get the right stone on your site.

Gravel, Stone and Soil for Hardin County, OH